solid wood is a natural product with a distinctive feel. no two pieces of solid wood are alike; even within a single trunk, color, grain and other visual properties vary. specific features such as hairline cracks, knots, growth irregularities, unevenness or the movement of the wood are typical characteristics of solid wood and are to be regarded neither as a defect nor as a reduction in value.
birch plywood panels consist of birch veneers glued crosswise. the exposed plywood edge shows this build-up, including small gaps between the veneers. by their construction, plywood panels are very stable, but tend to warp across the surface.
veneered (13 mm, 18 mm, 24 mm, 30 mm, 40 mm): the applied veneer is about 0.5 mm thick. the veneer sheets are arranged to follow a natural grain pattern. mechanical damage to veneered surfaces can only be sanded out to a very limited extent.
compact laminate panels – also called hpl – consist of paper layers pressed with synthetic resin. furniture made from compact laminate is marked by a fine play of edges. the material responds to changes in climate like wood and tends to warp if its two faces are not exposed to identical conditions. please protect your compact laminate furniture from direct sunlight and heat. care instructions are under service / care.
as a coating: the coating has a matte black or matte white soft-touch surface and is 0.7 mm thick. fingerprints barely show. the surface is easy to clean, antistatic and suitable for contact with food. as compact laminate, soft-touch black / soft-touch white (6 mm for digital, 10 mm for kontext, matrix, pi, tektur, linux, 12 mm for mono, metrum): matte black or matte white soft-touch surface, black or white core. no fingerprints. easy to clean, antistatic, suitable for contact with food.
black
white
textured black / textured white (6 mm for digital, 10 mm for kontext, matrix, pi, tektur, linux): matte black or matte white, lightly textured surface, black or white core. scratch-resistant, easy to clean.
black
white
the white coating is smooth and shows fine irregularities and inclusions. because the coating is thin, the structure of the wood shows faintly through it.
white
the black coating is smooth and shows irregularities and inclusions. because the coating is thin, the structure of the wood remains slightly visible and tangible. for reasons of production, phenolic resin coatings do not always have an identical degree of gloss.
black
the black coating is smooth and shows fine irregularities and inclusions. because the coating is thin, the structure of the wood remains slightly visible and tangible.
black
birch plywood with a colored hpl coating, 14 mm thick. fifteen shades are available; the configurator offers the same shades as a powder coating for the bases.
diamantweiss
saba grün
achatgrau
graphitgrau
basalt
schwarz
champagner
kaschmir
trüffel beige
taupe
acai
mandarin orange
verde
black green
karibik blau
furniture linoleum panel with a european oak edge. every shade of the collection is available; further colors on request.
vapour
ash
pewter
basalt
charcoal
nero
mushroom
macadamia
soft lilac
pebble
taupe
mauve
espresso
burgundy
brick
clay
walnut
leather
olive
pistachio
conifer
blue haze
denim
smokey blue
stainless steel is available with a matte finish. this finely textured surface is achieved by glass bead blasting; it reflects little light and appears warmer than brushed or polished stainless steel.
steel is powder-coated in a matte finish and available in signal white (ral 9003) or jet black (ral 9005).